Post Reply

If you were logged in you would gain 3 XP for posting a reply.

Please respect our terms of use when participating in Nibbits.

Preview
Comment
We will show a masked version of your IP address as well as your name.

You are replying to:

  • ok its simple

    lets say a map takes about 14second from the time you hit the Launch button to start and you see units! ok?

    you set the time to 15seconds (just to be sure) and then select your speed.

    the tool counts 15seconds and then sends the command to the game if it has started to change the speed to de selected one!

    so simple!

    why its happening this way? because so far there is no safe way to determine if the map was loaded and send the new speed directly after loading, or the speed memmoy hack wasnt found for lazylauncer2 yet!

    if your map loads in 10 seconds and you have set it in 15 NO Problem after 5 seconds while you are in the game you will notice your units will chnage speed automatically,

    so later its ok, you may just loose few seconds, BUT if you set the time too soon, and the map didnt have the time to load the command to change the speed will go wasted and you have to do it manual as usual with ++.

    hope its more clear on how its working

    This Business Is Binary. You are a 1 or a 0. Alive or Dead.- Play SC2 Offline with StarTCraft Loader: http://adf.ly/M0bMj
    Developer & Moderator
    avatar
    Battle.net
    Name:
    Vernam7
    Realm:
    Europe

Support Nibbits by linking to us: