Post Reply

If you were logged in you would gain 3 XP for posting a reply.

Please respect our terms of use when participating in Nibbits.

Preview
Comment
We will show a masked version of your IP address as well as your name.

You are replying to:

  • Spiral Classifier is widely applied to separate the particles into a number of products graded according to size in the complete closed loop together with ball mill in the mining industry, separate light particles from heavy particles in the gravity separation process, separate of fine particles and liquid from coarse particles in the metal ore dressing process, separate the slurry or liquid from solid particles in ore dressing plant.

    The mineral spiral classifier is widely used to pre-grading and inspection grading in closed circuits when used in the production flow of metal processing. According to the difference in sedimentation rate of mineral particles and mud, the particle sizes of ores with 1.5mm-0.03mm are classified. Waste mud or water for ore sand can be separated from the ores. It’s also usually applied to ore washing, desliming and dehydration and so on. The screw separator for gold ore is composed of transmission mechanism, (left, right) spiral water tank, lifting device, lower support, lubricating device, ore discharge valve, feed inlet, etc.

    The water tank of this spiral separator installed obliquely. The angle of inclination is determined according to equipment configuration of equipment in the process flow. The (left, right) spirals driven by the transmission mechanism rotates in the water tank. The finely grained slurry enters the water bank from the feed inlet at one side and forms one slurry precipitation zone, whose surface area and volume depends on the value of the water tank’s inclination angle and the height of overflow edge. The spirals rotating at a low speed play a certain stirring role. After the slurry is stirred, the light and fine particles float above the surface and overflow from the overflow edge. Then they flow into the next working procedure of ore dressing. The heavy and thick particles sink into the bottom of the water tank and become return sand which is transported by the spirals to the ore discharge mouth for discharge.

    spiral chute separator: http://www.chinaquarry.com/products_show/pro30.html

    ball mill: http://www.sino-ball-mill.com/
    spiral separator: http://www.hxjq-ballmill.com/pro/screw_classifier.html

    Send Message Reply Permalink
    Posted 2014-07-04
    Registered User
    avatar

Support Nibbits by linking to us: