Hi ngkhanmein I have the enUs version and i used the relocalizer to change it to the enGB version then I update to patch 1.4.0 paste the sc2copy.exe and .data to the SC2 directory also de keytro, the run the sc2copy.exe as admin after that run the keytro as admin and press the f2, did I miss any step? the good thing is that the allin still works but can't watch replays or play chalenges :( thx 4 ur help
i can't help u with the replay cos i can't play certain replay also.
ur step is wrong. no need ctrl c the sc2copy.exe & .data to sc2 directory. follow this step..
1) update from internet or use the off9 1.4.0 updater 2) after finish, run the sc2copy.exe 3) when is ok, run the keytro 4) hit f2 few times(sometimes might missed it) remark: some lappy need press Fn+F2 5) hit esc & start run the shit
if ur replay is old version u need to roll back the version to play it. quite troublesome. i know the got switcher but mostly will messed up whole shit. some might get lucky but not me!
All you need to do to start an earlier version of the game is start it from Versions/Base1xxxx/SC2.exe, where 1xxxx is the version of the game you want to play.
Just tossing out a small bit of information. Everyone says to disable, or nearly so, your network adapter or block Starcraft II in the firewall to keep it from updating. Unfortunately I have applications running in the background that won't react well to nuking my network connection and Windows Firewall apparently can't block the game.
That said I found a solution short of using the SC2AllIn1 loader to play Campaign games without the game trying to update itself. Block all permissions to the Updates folder. Without being able to read/write to it the launcher/updater will eventually give up, Play will light up, and you can play the game.
For those who don't know how to do this: #1 In the Starcraft 2 folder right-click on the Updates folder. #2 Click on the Security tab. #3 Click on the Advanced button. #4 In the new Advanced Security Settings window click on the Owner tab. #5 Click on the Edit button. #6 Select your account, not Administrator or Administrators, from the group, and hit OK twice to go back to the Properties window and Security tab. #7 Your account name should now be the only name in the "Group or user names:" box. Click edit. #8 At the bottom of the new window you'll see "Permissions for <account name>" with all the Allow check boxes checked off. Click on the check box next to Modify under the Deny column and hit OK. Hit OK again to close the Properties window and you're done.
As I said, locking down the permissions like this will cause the patcher to freeze up a bit before letting you play the game normally, but it's still faster than having to load a map and then exit out of it first if all you want to do is play Campaign mode.
vernam7, is your sc2LicKeygen works in 1.4.1 patch? I tried it several times as you did on the vid, it's not working..hope you have other LicKeygen for 1.4.1 patch..Thanks ^_^
I got SC2Allinone working on the patch before 1.4.0 (the second crack you added - the one with bad map editor), but after closing it and trying to start it again, it just said it misses some files (as before with previous patches/cracks) and lagged my computer. Only reinstall of SC 2 helped (not sure, maybe just Allinone) and I could start it once again, but after that, same story... Do you know the problem/fix for it, or if its gone with patch 1.4.1?
P.S. Oh, and does that crack work with 1.4.1? Thank you for answer.
Hey guys, please help me. I've done everything right, but when i click 'Launch' in the sc2allin1, it says: 'Your StarCraft II installation is corrupt. Would you like to run the Repaid tool now?'
it works but it wont show the profile selection screen..it just goes directly to the campaign menu with no profile created..it can play the campaign and save it but cant load it since it crashes,possibly due to no profile selected..please help..TIA
so, what should we do? how to play the v1.4.1, I updated the game to v1.4.1 then I used the Offline Patch (v1.3.6), but I took the last BASE folder from VERSIONS directory and the game ran, but I think I'm playing the v1.3.6 not v1.4.1 even I updated it to v1.4.1!!!
do this and reply me, just cut the LAST [Base] folder from [Versions] Folder, and take it out from the directory, run the game and tell me if it runs, then is it v1.4.1 or v1.3.6? because this offline patch is for v1.3.6, please vernam just make this offline patch for v1.4.1
It works perfectly, I got an old crack and an old version of sc2 that didn't works anymore.
I update my starcraft2 thanks to blizzard online update to V1.4.1 (french). and I apply Source_Starcraft_II_Wings_Of_Liberty_v1.4.0_Update-RazorDOX crack without removing any version folder (i just run sc2_copy.exe and keytro.exe)
and i could play skirmish without licence (using SC2Allin)
just wondering... i followed the instruction. 1. install the game 2. download and apply the 1.4.1 enGB patch 3. run sc2copy.exe(razor 1.4.0) 4. when its done, run keytro (razor 1.4.0), then f2 5. esc then start the game
i noticed that the won't start(using sc2allin or via the shortcut). any thoughts?
the game itself won't start.when i run the starcraft nothing happens. though the starcraft exe can be seen in the task manager. but if i don't run keytro, the game will start but i get the invalid license message
check post #1 is the updated crack licence generator should work with the latest patch! make sure you game has NO OTHER cracks installed before and that the 1.4.2 patch is normally applied!
I run the Sc2Copy.exe as admin then the keytro press f2 but the game still block why isn't working?
201.200.227.xxx
terran.. just followed the instructions. i think u din followed.
175.143.27.xxx
Hi ngkhanmein I have the enUs version and i used the relocalizer to change it to the enGB version then I update to patch 1.4.0 paste the sc2copy.exe and .data to the SC2 directory also de keytro, the run the sc2copy.exe as admin after that run the keytro as admin and press the f2, did I miss any step? the good thing is that the allin still works but can't watch replays or play chalenges :( thx 4 ur help
201.200.227.xxx
hi Its working now :D was something with the relocalizer it wasn't changing version properly fix that and work just fine thx very much anyway
201.200.227.xxx
i can't help u with the replay cos i can't play certain replay also.
ur step is wrong. no need ctrl c the sc2copy.exe & .data to sc2 directory. follow this step..
1) update from internet or use the off9 1.4.0 updater
2) after finish, run the sc2copy.exe
3) when is ok, run the keytro
4) hit f2 few times(sometimes might missed it) remark:
some lappy need press Fn+F2
5) hit esc & start run the shit
if ur replay is old version u need to roll back the version to play it. quite troublesome. i know the got switcher but mostly will messed up whole shit. some might get lucky but not me!
175.143.27.xxx
All you need to do to start an earlier version of the game is start it from Versions/Base1xxxx/SC2.exe, where 1xxxx is the version of the game you want to play.
Just tossing out a small bit of information. Everyone says to disable, or nearly so, your network adapter or block Starcraft II in the firewall to keep it from updating. Unfortunately I have applications running in the background that won't react well to nuking my network connection and Windows Firewall apparently can't block the game.
That said I found a solution short of using the SC2AllIn1 loader to play Campaign games without the game trying to update itself. Block all permissions to the Updates folder. Without being able to read/write to it the launcher/updater will eventually give up, Play will light up, and you can play the game.
For those who don't know how to do this:
#1 In the Starcraft 2 folder right-click on the Updates folder.
#2 Click on the Security tab.
#3 Click on the Advanced button.
#4 In the new Advanced Security Settings window click on the Owner tab.
#5 Click on the Edit button.
#6 Select your account, not Administrator or Administrators, from the group, and hit OK twice to go back to the Properties window and Security tab.
#7 Your account name should now be the only name in the "Group or user names:" box. Click edit.
#8 At the bottom of the new window you'll see "Permissions for <account name>" with all the Allow check boxes checked off. Click on the check box next to Modify under the Deny column and hit OK. Hit OK again to close the Properties window and you're done.
As I said, locking down the permissions like this will cause the patcher to freeze up a bit before letting you play the game normally, but it's still faster than having to load a map and then exit out of it first if all you want to do is play Campaign mode.
68.13.114.xxx
why don't u just start the game from the latest base exe in versions folder? that way the launcher doesn't start at all.
the new keygen works, but god this UI its so annoying and hard to run everytime :P
vernam7, is your sc2LicKeygen works in 1.4.1 patch? I tried it several times as you did on the vid, it's not working..hope you have other LicKeygen for 1.4.1 patch..Thanks ^_^
124.6.181.xxx
I got SC2Allinone working on the patch before 1.4.0 (the second crack you added - the one with bad map editor), but after closing it and trying to start it again, it just said it misses some files (as before with previous patches/cracks) and lagged my computer. Only reinstall of SC 2 helped (not sure, maybe just Allinone) and I could start it once again, but after that, same story... Do you know the problem/fix for it, or if its gone with patch 1.4.1?
P.S. Oh, and does that crack work with 1.4.1? Thank you for answer.
94.136.137.xxx
Hey guys, please help me. I've done everything right, but when i click 'Launch' in the sc2allin1, it says: 'Your StarCraft II installation is corrupt. Would you like to run the Repaid tool now?'
Whats the problem?
89.135.112.xxx
it works but it wont show the profile selection screen..it just goes directly to the campaign menu with no profile created..it can play the campaign and save it but cant load it since it crashes,possibly due to no profile selected..please help..TIA
112.204.115.xxx
just to add..i didnt use keytro since its not included in the guide..did i miss something like using it anyways..thanks
112.204.115.xxx
i tired but doesnt seem to work anyone can help with keystro used for v1.4+
182.177.55.xxx
so, what should we do? how to play the v1.4.1, I updated the game to v1.4.1 then I used the Offline Patch (v1.3.6), but I took the last BASE folder from VERSIONS directory and the game ran, but I think I'm playing the v1.3.6 not v1.4.1 even I updated it to v1.4.1!!!
83.170.105.xxx
do this and reply me, just cut the LAST [Base] folder from [Versions] Folder, and take it out from the directory, run the game and tell me if it runs, then is it v1.4.1 or v1.3.6? because this offline patch is for v1.3.6, please vernam just make this offline patch for v1.4.1
83.170.105.xxx
thanks !!!
It works perfectly,
I got an old crack and an old version of sc2 that didn't works anymore.
I update my starcraft2 thanks to blizzard online update to V1.4.1 (french). and I apply Source_Starcraft_II_Wings_Of_Liberty_v1.4.0_Update-RazorDOX crack without removing any version folder
(i just run sc2_copy.exe and keytro.exe)
and i could play skirmish without licence (using SC2Allin)
great ;)
87.231.39.xxx
just wondering... i followed the instruction.
1. install the game
2. download and apply the 1.4.1 enGB patch
3. run sc2copy.exe(razor 1.4.0)
4. when its done, run keytro (razor 1.4.0), then f2
5. esc then start the game
i noticed that the won't start(using sc2allin or via the shortcut). any thoughts?
180.192.173.xxx
how about the campaign?
2.178.187.xxx
the game itself won't start.when i run the starcraft nothing happens. though the starcraft exe can be seen in the task manager. but if i don't run keytro, the game will start but i get the invalid license message
180.192.173.xxx
check post #1 is the updated crack licence generator should work with the latest patch! make sure you game has NO OTHER cracks installed before and that the 1.4.2 patch is normally applied!
http://sc2.nibbits.com/forums/43/view/1420/starcraft-ii-licence-generator-works-with-all-versions?p=1#p31647
i am currently uploading the files should be up in few mins.
thanks
after i updated to version 1.4.2, my starcraft 2 full edition become starter edition and cannot play as guest, any crack for these?
god damn it, i pointed you hre to try the 1st post crack dude not to spam the same msg again!!!!!
i will try it, thanks.